Asian Surveying & Mapping
Breaking News
Thailand plays host to Southeast Asia’s largest space technology event
Thailand Space Week 2024, the region’s premier international space...
UAE Space Agency delegation participates in key United Nations General Assembly meetings on Outer Space
UAE Space Agency delegation participates in key United Nations...
Ireland unveils Europe’s first verified GNSS data stream service
The National Standards Authority of Ireland’s National Metrology Laboratory...
Japan launches Kirameki 3 military communications satellite with H3 rocket
HELSINKI — Japan launched the Kirameki 3 communications satellite...
World’s first wooden satellite launched into space
The world's first wooden satellite has blasted off on...
Japan’s H3 Rocket Launches Military Communications Satellite
Japan’s H3 rocket launched a Japanese military communications satellite...
Russian rocket launches Iranian satellites into orbit as Moscow and Tehran expand ties
MOSCOW (AP) — A Russian rocket on Tuesday blasted...
Juno satellite to be built by SSTL for the UK’s MOD DE&S for advanced military ops
The £40 million project with Surrey Satellite Technology Ltd. (SSTL)...
ISRO set to launch EU’s Proba 3 Sun observation mission in December
Union minister Jitendra Singh also set out the ambitious...
UK to Acquire $51 Million ‘Juno’ Earth Observation Satellite
The UK Ministry of Defence has awarded a 40 million...

September 22nd, 2022
GA-ASI Creates Additive Design & Manufacturing Center of Excellence

New Center Uses Additive Parts to Streamline Manufacturing of UAS

SAN DIEGO  – General Atomics Aeronautical Systems, Inc. (GA-ASI), the world leader in the design and manufacture of Unmanned Aircraft Systems (UAS), radars, and electro-optic and related mission systems solutions, has established a new Center of Excellence for its Additive Design and Manufacturing (AD&M). The Center is focused on rapid-reaction manufacturing of GA-ASI’s line of UAS using fully functional and flight-ready Additive Manufacturing (AM) applications, research and development, large-scale tooling, and next-generation flight hardware.
Over the past decade, GA-ASI has invested in the onboarding of Additive Manufacturing (AM) technologies, as well as leading the formation and rapid growth of a dedicated AM department five years ago.
“GA-ASI is continually looking for ways to enable, accelerate, and integrate Additive Manufacturing technologies into our designs, our operations, and our products,” said GA-ASI President David R. Alexander. “Through our AD&M Center of Excellence, we’re using a structured and stringent qualification process for AM applications that delivers a positive business case for us over conventional manufacturing methods. Through a comprehensive and holistic approach, our team of AM professionals are working to increase the adoption of AM parts for the benefit of our aircraft and ultimately, our customers.”
GA-ASI has qualified over 300 flight components across the different AM modalities used for production. In order to develop and qualify flight-capable AM applications, GA-ASI is expanding its AM ecosystem composed of the key elements required for bringing an AM application from a prototype stage (print right once) to a production-level stage (print right always).
GA-ASI’s AM ecosystem has enabled the advancement of repeatable and reliable production-grade 3D printing within the company. This has been supplemented by ecosystem-controlled processes, the establishment of an applications team, and a well-defined expansion roadmap.
GA-ASI performs some recurring production activities at its AD&M Center of Excellence, but the demand for rapid-reaction and low-rate manufacturing has required the development of a strong AM manufacturing supply chain for the overflow production of complex end-use thermoplastics and metal parts.
GA-ASI estimates that the use of AM parts on its new UAS platform – the MQ-9B – has saved the company over $2 million in tooling costs and over $300,000 per aircraft in recurring cost avoidance by using approximately 240 AM parts on that aircraft platform. Overall, the number of AM applications continues to grow rapidly, fueled by the AM ecosystem established at GA-ASI. As a result, the company already has more than 10,000 additively manufactured components on the aircraft it has produced, and the new MQ-9B SkyGuardian® and SeaGuardian® models are leading the industry in the use of AM parts.

About GA-ASI
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a leading designer and manufacturer of proven, reliable remotely piloted aircraft (RPA) systems, radars, and electro-optic and related mission systems, including the Predator® RPA series and the Lynx® Multi-mode Radar. With more than seven million flight hours, GA-ASI provides long-endurance, mission-capable aircraft with integrated sensor and data link systems required to deliver persistent flight that enables situational awareness and rapid strike. The company also produces a variety of ground control stations and sensor control/image analysis software, offers pilot training and support services, and develops meta-material antennas. For more information, visit www.ga-asi.com.

Avenger, Lynx, Predator, SeaGuardian and SkyGuardian are registered trademarks of General Atomics Aeronautical Systems, Inc.